I had my track tension spring unit dammaged when my track was thrown off.
The bolt is bent.
It was a nice struggle to get it all loose. Those nuts don't like a bent bolt.
When i was sepparating the unit the bolts were in the position of the red arrow.
![Image](http://www.jdcrawlers.com/uploads/dsc00453_pijl.jpg)
I never did get it. In my opinion this thing was not able to plumage (or bounce) like it is supposed to.
so i got into my books and came with this setting. Is this correct?
![Image](http://www.jdcrawlers.com/uploads/dsc00453.jpg)
I have read that i need to tight the big spring about 4 inch. is this correct?
![Image](http://www.jdcrawlers.com/uploads/dsc00458.jpg)
![Image](http://www.jdcrawlers.com/uploads/dsc00452.jpg)
Ps how about my welded cast iron front cap!!! Not bad for a amateur!!! And self learning welder!
2 small pieces were broken of bij impact (track trown)
hugo