350-C isolator springs

Post support questions about your JD350 and newer crawler here
Post Reply
donnaldp46
40C crawler
40C crawler
Posts: 12
Joined: Sat Jan 16, 2010 11:31 am

350-C isolator springs

Post by donnaldp46 » Mon Jan 18, 2010 11:25 am

I have the engine out because of a reverser problemand was wonder if I should change the isolator springs while I am at it? :?: The isolater seemed to make alot of noise at a idle before the other problem caused me to desassemble it. The isolator seems loss and you can turn it some before it comes tight. Is there specs for this and the springs ? I would sure appreciate any advice you can give . THANK YOU
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10957
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Mon Jan 18, 2010 2:41 pm

Check the mounts that the springs set on as well. I put springs in my 350 straight, but the mounts showed wear as well. I rotated all of the mounts until I got them to a non-worn area, but would have preferred to have replaced them if I could have waited for the parts.
Lvaoy
Top
KenP
350 crawler
350 crawler
Posts: 824
Joined: Tue Aug 26, 2008 2:05 pm

Are you feeling lucky?

Post by KenP » Mon Jan 18, 2010 2:47 pm

deleted
No longer posting on JDCrawlers
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 97 guests