Now that I'm almost done with my 450C rebuild (and yep, got that rebuilt injection pump in yesterday and working just fine), I am looking to install an air precleaner assembly by the time the dust starts to fly in June. I think the OD of the intake is 2-1/2 inches but not sure what the cfm requirements are for the 4219 turbo engine.
Anyone got suggestions where to find a precleaner assembly on line? Just looking for the regular dust bowl setup, not the new Donaldson topspin model (unless you think it is worth the extra cost).
Steve
source for air precleaner assembly for 450C dozer?
source for air precleaner assembly for 450C dozer?
JD 450C, Serial No. 316559T
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
450 precleaner
Hi go to store.airflo.com/precleaners.parts---html. thae have 2.5 in 150 cfm for 34.05 plus shipping
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Re: 450 precleaner
Thanks much. I traded emails with Rick at Airflo and he said the 4219 engine has a 135 cfm requirement, making this prefilter more than adequate. Thanks again, JT.jtrichard wrote:Hi go to store.airflo.com/precleaners.parts---html. thae have 2.5 in 150 cfm for 34.05 plus shipping
JD 450C, Serial No. 316559T
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
Who is online
Users browsing this forum: No registered users and 27 guests