Post support questions about your JD350 and newer crawler here
-
glindy
- 40C crawler

- Posts: 22
- Joined: Tue Sep 18, 2012 9:51 pm
- Location: STL
Post
by glindy » Mon Oct 15, 2012 11:16 pm
Have been clearing honeysuckle/4in trees w 350 and getting use to it. But sometimes it gives a loud intermittent squeal out when pushing a load/tree over,I back off and go again and it shoves with no noise. I know the left rear needs clutches/brake band,but what other areas would have a coupling that would produce a loud squeal?
The trans/rear area also seems really noisy especially in 2/r under no load,combined w engine noise,have to wear earmuffs on it.
350 loader
-
vestor_guy
- 440 crawler

- Posts: 129
- Joined: Sun Mar 13, 2011 4:48 am
Post
by vestor_guy » Tue Oct 16, 2012 12:57 am
Is the squeal you are hearing similar to the hydraulic relief valve?
-
glindy
- 40C crawler

- Posts: 22
- Joined: Tue Sep 18, 2012 9:51 pm
- Location: STL
Post
by glindy » Tue Oct 16, 2012 1:05 am
not sure,it is a high pitched squeal. how would i make the relief valve activate to hear it?
350 loader
-
glindy
- 40C crawler

- Posts: 22
- Joined: Tue Sep 18, 2012 9:51 pm
- Location: STL
Post
by glindy » Tue Oct 16, 2012 6:55 pm
That could be,as the left side needs brake band. Was using it today and thought I heard it a couple times,more on that side.
Damn honeysuckle will kill ya,shoved in a couple sink holes for deer season and it broke some quick links I used for mesh hanging off the rear.
350 loader
Who is online
Users browsing this forum: No registered users and 6 guests