JD 350C Winch

Post support questions about your JD350 and newer crawler here
Post Reply
donnaldp46
40C crawler
40C crawler
Posts: 12
Joined: Sat Jan 16, 2010 11:31 am

JD 350C Winch

Post by donnaldp46 » Thu Feb 14, 2013 5:28 pm

I have a 350C with winch problems. Where can I get winch clutch and brake parts other than JD? They are expensive there and they do not seem to have all the partrs I need. Any ideas.

Thanks
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10957
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Thu Feb 14, 2013 7:02 pm

I may be able to get brake bands, but not sure.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
donnaldp46
40C crawler
40C crawler
Posts: 12
Joined: Sat Jan 16, 2010 11:31 am

Post by donnaldp46 » Fri Feb 22, 2013 10:31 pm

Thanks, I think the brake band is ok. I seem to have a pressure problem. I get only about 300psi at the check port. I can not find any leeks on the brake side. I screwed the relief valve screw in as far as it will go and no luck. I looked in the service manual and I see something called a ball connector and I find it in the parts book but what does it do. The part number I think it is AT29070. Could it be my problem? Any ideas??? Thanks Very Much!!

Don
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 85 guests