Low Pressure Grease Gun

jthornton · Post by **jthornton** » Sun Jan 26, 2014 5:05 am

Has anyone used the Alemite Heavy Duty Lever Oil Gun #4035 to grease the track rollers?

JT

jtrichard · Post by **jtrichard** » Sun Jan 26, 2014 9:45 pm

yes i have one with a button head fitting on it and it works great with SAE 140 gear oil and @1800 psi max you can sure feel when they are full

jthornton · Post by **jthornton** » Fri Jan 31, 2014 6:11 pm

I have the low pressure grease gun on the way and now I'm looking for some #0 grease. Would any on this page be better?

http://www.mcmaster.com/#nlgi-no.-0-grease/=qhv03e

JT

Post by **Lavoy** » Fri Jan 31, 2014 6:15 pm

You should be able to pick up corn head grease at your local dealer for less than that.
Lavoy

jthornton · Post by **jthornton** » Sat Feb 01, 2014 5:12 am

Ok, Thanks. I'll check out the local JD dealer to see what he has.

JT

Post by **Lavoy** » Sat Feb 01, 2014 10:16 am

If he doesn't have it on hand, should be able to get it for you in two days freight free.
Lavoy

jthornton · Post by **jthornton** » Mon Feb 03, 2014 10:36 am

The local JD dealer had corn head grease for $3.60 a tube.

I canceled the order for the oil gun, I'll just get a pistol grip gun and use that.

JT

JDcrawlers Messageboard