JD 350 blade
- lurch85
- 430 crawler
- Posts: 95
- Joined: Fri Feb 01, 2013 6:11 pm
- Location: Upper Peninsula of Michigan
JD 350 blade
I have a 6 way blade on a 350 straight. trying to do some work on the joystick and trying to figure out what model number it is so i can look up parts on JDparts.com Anybody got any help?
John Deere 420C, John Deere 350 straight with Gafner loader, John Deere 4020
Last price I knew of on the joystick kit was about $1200! Individual parts are available, but some of them are real pricey too. I welded all the holes shut, redrilled them and put in new roll pins, what a difference. Make sure to put the new bushing in that the handles goes through, and if the handle is worn too, make a new one.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Just the stick itself yes, might be tough with the small linkage pieces getting them off.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 64 guests