Post support questions about your JD350 and newer crawler here
-
pburke
- 420 crawler
- Posts: 43
- Joined: Sun Jul 05, 2009 8:05 pm
- Location: ok
Post
by pburke » Mon Apr 06, 2015 8:37 pm
Have 450B and the starter is broken where the solenoid attaches. Also every now and then oil filter gets smashed. Any clues as to what to look at for cause?
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Mon Apr 06, 2015 9:01 pm
what you running? loader or dozer? and what are you working with? any side shields? sounds like something getting where it should not be
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
pburke
- 420 crawler
- Posts: 43
- Joined: Sun Jul 05, 2009 8:05 pm
- Location: ok
Post
by pburke » Mon Apr 06, 2015 9:11 pm
Dozer. No side shields. Wondering if frame can twist that much.
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Mon Apr 06, 2015 9:38 pm
ONLY if you have broken bolts like frame to bell housing or to final drives ect.somewhat common
http://www.jdcrawlers.com/messageboard/ ... 55&start=02010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 1 guest
