450B trans temp.

Post support questions about your JD350 and newer crawler here
Post Reply
suzkdoc
MC crawler
MC crawler
Posts: 2
Joined: Sun May 17, 2015 1:42 pm
Location: PA.

450B trans temp.

Post by suzkdoc » Mon May 18, 2015 3:32 pm

Hello, Does anyone know what is the normal temperature of the trans. should be? I replaced the broken temp. gauge with a oil temp. gauge that reads 0 to 250. It is running around 215 degrees. My manual does not give a temperature range in which it should run. Thanks!
Top
User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Mon May 18, 2015 11:43 pm

That would be a good temperature for cooking any water out of the system, Not sure I would worry if it doesn't get much hotter.
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
Top
User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Mon May 18, 2015 11:45 pm

Argg, the dreaded doublepost.
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
Top
User avatar
jsal
1010 crawler
1010 crawler
Posts: 363
Joined: Sun Oct 28, 2012 6:27 pm
Location: armada Michigan

Trans temp

Post by jsal » Wed May 20, 2015 12:04 pm

I have a 450C replaced the electric with a mechanical no degrees on it but the needle stays in the lower section yours seems hot to me .

JIM
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 87 guests