How do I connect this ignition switch!

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
Les
420 crawler
420 crawler
Posts: 34
Joined: Wed Jul 22, 2015 12:13 pm
Location: Cleveland, NC

How do I connect this ignition switch!

Post by Les » Mon Aug 24, 2015 11:58 am

I'm an Electrical Engineer and I've never seen this type of terminal before. Can someone please tell me how this connects to the wiring harness? I bought the wiring harness for the switch and its terminals look a LITTLE BIT like a female bullet connector, but split and bell shaped. I'm stumped.
https://www.flickr.com/photos/133998523 ... ares/P85TD
Last edited by Les on Tue Sep 01, 2015 6:27 am, edited 9 times in total.
Les
1971 450B Crawler Dozer
Top
RMilanese
40C crawler
40C crawler
Posts: 10
Joined: Mon Aug 17, 2015 2:52 pm
Location: Litchdield County, CT

Post by RMilanese » Mon Aug 24, 2015 2:04 pm

Photo Link is bad...
Top
User avatar
Les
420 crawler
420 crawler
Posts: 34
Joined: Wed Jul 22, 2015 12:13 pm
Location: Cleveland, NC

Post by Les » Wed Aug 26, 2015 7:32 am

Try it now.
Les
1971 450B Crawler Dozer
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Aug 26, 2015 8:42 am

HI it takes a connector like this one BUT could be a slightly different size http://www.ebay.com/itm/GM-A-C-AC-Compr ... c0&vxp=mtr
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
User avatar
Les
420 crawler
420 crawler
Posts: 34
Joined: Wed Jul 22, 2015 12:13 pm
Location: Cleveland, NC

Post by Les » Wed Aug 26, 2015 9:09 am

Ah! I was looking at the wrong end of the harness I got from John Deere. I feel a bit stupid. Thanks, jtrichard!
Les
1971 450B Crawler Dozer
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 2 guests