I have a JD 350 C. I went to adjust the valves and there are NO set screws with lock nuts on the rocker arms above the push rods. There is a nut on the push rod below the rocker arm. Looking down into the hole in the rocker arm above the push rod it looks like a tube is threaded into the rocker arm but I see no way to adjust that. WHAT DO I HAVE???? Can and how do I adjust the valves? HELP PLEASE
Thank you
donnaldp46[/img]
350 C valve adjustment
I know this is late but the nut is what you turn to adjust the valves. They are fitted in the rocker arm with a very tight fit. So it takes considerable force to turn these nuts. Sorry again for not seeing this post earlier.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.
-
- 40C crawler
- Posts: 12
- Joined: Sat Jan 16, 2010 11:31 am
Who is online
Users browsing this forum: Bing [Bot] and 91 guests