Hello,
I am looking for an operator canopy for a 350D dozer. Numerous searches through John Deere Parts and dealership visits have not given me any clarification as to which part number I should be looking for.
The machine has the mounts and isolator bushings that accept a canopy with the yoke or clevis type ends. The only canopy in the 350D parts manual of this type is for backhoe application and has the flip top hatch. All other canopies shown resemble the bolt on style that were used on 350Bs and Cs. I do find a canopy that resembles what I am looking for in the 450D manual but I have no idea if this canopy would fit the 350D.
I have looked at many 350D images online and all of them take this style of canopy so I am sure that this machine is not a one of a kind in any way. Because of this I am not sure why this has become so difficult. My father in law has a 550 dozer with this style of canopy and some very quick measurements seem to make it appear that it would fit on the 350D.
Can anyone shed some light on this? Beyond that, the next challenge will be to find a good used canopy but I need start with identifying the part number.
Thanks in advance!
John Deere 350 Operator Canopy
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: John Deere 350 Operator Canopy
Hi,
I think the D is the same as the C for ROPS, where there is the normal one and a different one for the backhoe. And, it sounds like you have the mounts on your machine for the backhoe ROPS.
Stan
I think the D is the same as the C for ROPS, where there is the normal one and a different one for the backhoe. And, it sounds like you have the mounts on your machine for the backhoe ROPS.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
-
- MC crawler
- Posts: 2
- Joined: Sat Jul 21, 2018 5:43 am
Re: John Deere 350 Operator Canopy
Thanks Stan. The pictures of the 350Ds floating around the web all show the standard canopy without the flip hatch. I think I'll do some more measuring on the 550 and see if that doesn't work. Somebody has to have a good explanation for it though.
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: John Deere 350 Operator Canopy
Hi,
Maybe they are the same, but the 550 is a larger machine. The thing has to keep the weight of the machine from crushing you should it flip over. So, I would think that a 550 has a larger ROPS than a 350.
Stan
Maybe they are the same, but the 550 is a larger machine. The thing has to keep the weight of the machine from crushing you should it flip over. So, I would think that a 550 has a larger ROPS than a 350.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 77 guests