Jd 450c oil in bellhousing
-
- MC crawler
- Posts: 2
- Joined: Fri Nov 30, 2018 12:14 pm
Jd 450c oil in bellhousing
Hello had to change clutch and pressure plate on the machine. When I put the pipe that throw out bearing slides on think I went to far hit trans pump seal. Anyway it haunted me by pumping all trans fluid into bellhousing. What’s easiest way to tackle this issue?
Re: Jd 450c oil in bellhousing
Someone might have another idea but I believe you need to pull the engine back out and work to it from there; but I bet you already knew that and were just hoping for a different answer.
Jim
Jim
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Re: Jd 450c oil in bellhousing
I agree with Jim B.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 15 guests