My 450 c has a winch that constantly runs, it won’t turn off. I changed the oil and cleaned the screen.
It always run great but sits a lot. Any ideas ?
3325 winch
Re: 3325 winch
What do you mean by won't shut off? Do you mean it that it won't stop turning the drum, winding the cable in? Or that the drive shaft to it is turning all the time? Does it have a rotary control valve or spool control valve?
Re: 3325 winch
The winch drum turns as long as the dozer engine is on ,
Constantly winding the cable in.
As far as control valve, it’s a small box on right side by the oil filter. I took it off and just some o rings and it looked fine.
The control handle is by my right thigh while sitting in the drivers seat. I believe all the way forward was engaged, half way up was neutral and full up was brake.
Constantly winding the cable in.
As far as control valve, it’s a small box on right side by the oil filter. I took it off and just some o rings and it looked fine.
The control handle is by my right thigh while sitting in the drivers seat. I believe all the way forward was engaged, half way up was neutral and full up was brake.
-
- 2010 crawler
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Re: 3325 winch
This would indicate the clutch portion is not releasing. You need the pull the cover and remove the clutch cover (left hand side when standing at back of your crawler) The clutch piston or discs will need servicing.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Who is online
Users browsing this forum: No registered users and 24 guests