450 power steering?

[lti]

Anyone have much experience with the pump that mounts on front of engine to the block. thanks

[tjdub]

I've had mine off to put a new seal in it. Found out the shaft was too worn so the new seal still leaked. I was going to take it out again and drive a Speedi-Sleeve on the shaft, but that keeps moving down the TODO list.

What do you want to know about it?

[Tigerhaze]

FYI as discussed in other threads the "seal" on those pump shafts is really a dust seal so putting in a new seal on a worn leaking pump will not stop the leak under pressure. They are basically "throw away" pumps when worn.