Injector Bypass Grommets

DrLoch · Post by **DrLoch** » Sun Dec 06, 2015 7:31 am

Anyone know the parts number for the Injector bypass hose fitting grommets? I've got one that is leaking fuel

LeonardL · Post by **LeonardL** » Sun Dec 06, 2015 8:35 am

It depends on which one you need. If it is the one for the injector where the "T" fastens to the injector itself it is ( T29539 ) If it is the return line tubes where they fasten to the sides of the "T", it is ( R51936 ) Hope this helps!!

DrLoch · Post by **DrLoch** » Mon Dec 07, 2015 7:59 am

Thanks Leonard, It's the one where the "T" fastens to the injector itself but if going to replace one I'll replace all of them.

I'm assuming it's a Deere item.

LeonardL · Post by **LeonardL** » Mon Dec 07, 2015 10:14 am

Yeah, Deere would be your best bet. If you have a good Diesel pump repair business nearby, they may have them as well. I usually get them through Deere and they are relatively cheap. A Deere Ag dealer will have these as well. So if they are closer I would go with them.

DrLoch · Post by **DrLoch** » Mon Dec 07, 2015 12:13 pm

Found them, http://oregonfuelinjection.com/ they look like a good source for people in need of rebuilt injector pumps and maybe injectors.

jsal · Post by **jsal** » Tue Dec 08, 2015 11:46 am

Do you know that JD has a online parts site for all the machines go to JD Parts create an account Log in put your machine model in and you are in buisness can also buy parts .

JIM

Scottyb · Post by **Scottyb** » Tue Dec 08, 2015 12:39 pm

I tried this without success. Possibly only for USA address ?

DrLoch · Post by **DrLoch** » Wed Dec 09, 2015 7:55 am

I found them and have ordered from oregon fuel injection. May be here today, tomorrow for sure. Will pass on if they look to be correct.

JDcrawlers Messageboard

Injector Bypass Grommets

Injector Bypass Grommets

Who is online