Advice for aftermarket undercarriage parts in Northwest?
- Idaho jarhead
- 40C crawler
- Posts: 22
- Joined: Mon Jan 04, 2016 1:33 pm
Advice for aftermarket undercarriage parts in Northwest?
Howdy again, thanks to everyone who has offered advice on purchasing decision on a jd 450 dozer with winch. It's looking like I may end up with the c model that has less UC left so I'm looking for any input on best places to look for aftermarket undercarriage parts. I guess I'll start collecting them now so I don't need to come up with 5-8000 all at once. I know there's lots of places on the interweb, but I guess I was hoping to not spend weeks wading thru them all if someone had a recommendation for somewhere with knowledgeable staff and reasonable prices. Thanks.
DH 130 excavator
JD 450 C six way with wnnch and arch
Oliver HG 42 crawler loader
Bobcat 853 h
Woodmizer lt 40 sawmill
JD 450 C six way with wnnch and arch
Oliver HG 42 crawler loader
Bobcat 853 h
Woodmizer lt 40 sawmill
450C undercarriage
I talked to a guy in your part of the country and prices seemed very good.
his name and company..
Glenn Russell
Vista Equipment LLC
360-314-7413
I think it was Oregon but not sure,, they were Korean product, ITR or KUT,
I have bought and used ITR and found it to be quite good,, But stay away from the Chinese garbage... Mark
his name and company..
Glenn Russell
Vista Equipment LLC
360-314-7413
I think it was Oregon but not sure,, they were Korean product, ITR or KUT,
I have bought and used ITR and found it to be quite good,, But stay away from the Chinese garbage... Mark
350 loader,350c dozer winch and arch,450c winch and arch,450e winch and arch,D37p komatsu lgp dozer,D85 Komatsu dozer,D8k Caterpillar.
- Al Swearengen
- 440 crawler
- Posts: 127
- Joined: Sat Aug 28, 2010 8:01 am
- Location: Sierra Nevadas...Gold Country!
Berco...
Berco of America Aftermarket, WA
117 23rd Street S.E.
Puyallup, WA 98372
Phone: 253-845-0707
Fax: 253-845-0706
117 23rd Street S.E.
Puyallup, WA 98372
Phone: 253-845-0707
Fax: 253-845-0706
Area code look-up links 360-314-7413 to Vancouver, WA. FYI.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
- Jack-the-Ripper
- 430 crawler
- Posts: 96
- Joined: Tue Aug 10, 2010 11:28 pm
- Location: Napa, CA
Track Parts Idaho
When I lived in Sandpoint, ID I bought three sets of track rails, two for my 450s and one for my Komatsu excavator, from "Trackman" in Spokane, 713 N, Cook, 509 535-1661
They also got rollers, bearings, cylinder seals, sprockets, etc. for me, all at reasonable prices with very friendly personal service. They even delivered some parts (90 miles one way) and helped me troubleshoot some hydraulic control issues for the Komatsu finding a very simple adjustment when the local tractor shop couldn't figure it out. They were my "go to" guys for 10 years.
I used the cheaper Korean or whatever rails, and swapped my own grouser pads to them. Maybe 8 years ago, I paid about $2800 per pair of track chains for the 450's.
I also found "Norcan Parts and Equpment," 9423 N Market St, Spokane 509 466-3566 very helpful for new and used parts.
They also got rollers, bearings, cylinder seals, sprockets, etc. for me, all at reasonable prices with very friendly personal service. They even delivered some parts (90 miles one way) and helped me troubleshoot some hydraulic control issues for the Komatsu finding a very simple adjustment when the local tractor shop couldn't figure it out. They were my "go to" guys for 10 years.
I used the cheaper Korean or whatever rails, and swapped my own grouser pads to them. Maybe 8 years ago, I paid about $2800 per pair of track chains for the 450's.
I also found "Norcan Parts and Equpment," 9423 N Market St, Spokane 509 466-3566 very helpful for new and used parts.
JD450C (Jack the Ripper), JD450B (Jill the Wench), KomatsuPC120 (Ursa, The Big Dipper), Case580E (Ida Hoe), International 4400 Dump Truck
- Idaho jarhead
- 40C crawler
- Posts: 22
- Joined: Mon Jan 04, 2016 1:33 pm
Many thanks.
Thanks for all the helpful advice on aftermarket UC parts! I have got some good quotes already.
DH 130 excavator
JD 450 C six way with wnnch and arch
Oliver HG 42 crawler loader
Bobcat 853 h
Woodmizer lt 40 sawmill
JD 450 C six way with wnnch and arch
Oliver HG 42 crawler loader
Bobcat 853 h
Woodmizer lt 40 sawmill
- Idaho jarhead
- 40C crawler
- Posts: 22
- Joined: Mon Jan 04, 2016 1:33 pm
Purchase complete!!
Thanks to all who helped with advice, I got my 450 c home today and went to playing in the woods, now I gotta figure out how to add it to my signature on here.
DH 130 excavator
JD 450 C six way with wnnch and arch
Oliver HG 42 crawler loader
Bobcat 853 h
Woodmizer lt 40 sawmill
JD 450 C six way with wnnch and arch
Oliver HG 42 crawler loader
Bobcat 853 h
Woodmizer lt 40 sawmill
Who is online
Users browsing this forum: No registered users and 118 guests