Power shift multible cluthes for revese

[sam]

Some one mentioned this. Is this differant from reverser How does it work?

[digitup]

Same thing only in a different clutch set on some machines The 350-B-C machines the clutch packs are on the one shaft F&R.On the 450 as well as the 450B-C-D-E there are two shafts and two sets of clutches H&L and F&R.The 550-A -B three shafts and and two and a half sets of clutches 1&2 then.F&R.and3 by its self on the third shaft One clutch is Hi one Low .Or one foward one reverse in a reverser system basicly.Digitup.