450 clutch adjustment

Post support questions about your JD350 and newer crawler here
Post Reply
Ed schreit
MC crawler
MC crawler
Posts: 1
Joined: Thu Feb 09, 2017 12:05 pm

450 clutch adjustment

Post by Ed schreit » Wed Feb 15, 2017 7:55 am

On 450 clutch adjustment in the manual it says to adjust yokes on brake rods so pins will just go in . What yokes are they talking about

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Thu Feb 16, 2017 5:32 am

I think the yokes are under the seat on the rods that move when the clutch/brake levers are pulled.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Johntc23
40C crawler
40C crawler
Posts: 12
Joined: Sat Aug 10, 2013 11:21 pm
Location: SW Oregon

clutch adjustment 450

Post by Johntc23 » Thu Feb 16, 2017 10:36 pm

For my 2 cents when adjusting steering clutches on a 450 tie string to the 9/16 wrench when it slips and it will its easier then getting it out of dozer with an extension magnet
1968 450 Crawler Loader with 093 Backhoe

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Re: clutch adjustment 450

Post by gregjo1948 » Fri Feb 17, 2017 3:17 am

Johntc23 wrote:For my 2 cents when adjusting steering clutches on a 450 tie string to the 9/16 wrench when it slips and it will its easier then getting it out of dozer with an extension magnet
I hear you!!! Been there--done that!
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

Post Reply

Who is online

Users browsing this forum: No registered users and 61 guests