450 clutch adjustment
-
- MC crawler
- Posts: 1
- Joined: Thu Feb 09, 2017 12:05 pm
450 clutch adjustment
On 450 clutch adjustment in the manual it says to adjust yokes on brake rods so pins will just go in . What yokes are they talking about
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
I think the yokes are under the seat on the rods that move when the clutch/brake levers are pulled.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
clutch adjustment 450
For my 2 cents when adjusting steering clutches on a 450 tie string to the 9/16 wrench when it slips and it will its easier then getting it out of dozer with an extension magnet
1968 450 Crawler Loader with 093 Backhoe
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Re: clutch adjustment 450
I hear you!!! Been there--done that!Johntc23 wrote:For my 2 cents when adjusting steering clutches on a 450 tie string to the 9/16 wrench when it slips and it will its easier then getting it out of dozer with an extension magnet
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 77 guests