Ya, it takes ALOT of fluid to do a complete service. I run:
http://xtremeoil.com/wp-content/uploads ... -Fluid.pdf
I can get it on sale for $28.00 per 5 gallon pail at my local farm store and meets the JD specification J20A, B (Hy-Gard), J14B (303 Fluid), J14A/C .
I think it took 30 or 35 gallons in my loader.
new member intro, 450C in northern MS
Re: new member intro, 450C in northern MS
JD- 450C track loader
Serial #208336T
Serial #208336T
Re: new member intro, 450C in northern MS
Welcome to board Michael.
Thanks for the link on the fluid 77 Ford, I also need to change the trans fluid on mine as well.
I was flying Navy during the dark days of the military, 72 - 76. Participated in the police action in southeast Asia. Was there for the fall, shuttling people out and indoctrination center getting names so families could try to reunite.
Thanks for the link on the fluid 77 Ford, I also need to change the trans fluid on mine as well.
I was flying Navy during the dark days of the military, 72 - 76. Participated in the police action in southeast Asia. Was there for the fall, shuttling people out and indoctrination center getting names so families could try to reunite.
450C Track Loader
291457T
291457T
Re: new member intro, 450C in northern MS
Thanks for your service and happy 4th to all veterans.
-
- 40C crawler
- Posts: 10
- Joined: Sun Jun 18, 2017 8:07 pm
- Location: north Mississippi
Re: new member intro, 450C in northern MS
DrLoch,
Thanks for the welcome aboard, and thank you for your service under much harsher conditions. Mine time was all peacetime. I am a medical entomologist, and our value in the desert is minimal.
I hope everyone here had a great Fourth with no loss of fingers or eyes to the fireworks.
Michael
Thanks for the welcome aboard, and thank you for your service under much harsher conditions. Mine time was all peacetime. I am a medical entomologist, and our value in the desert is minimal.
I hope everyone here had a great Fourth with no loss of fingers or eyes to the fireworks.
Michael
Who is online
Users browsing this forum: No registered users and 76 guests