Hello, I am in the process of rebuilding a straight 450 loader. I am in the transmission and found out the oil manifold is
scored bad. So I have to have it re sleeved or find another one. My question is can I use one out of a 450b? What are the differences between the two? Seems like there are lots of 450b manifolds but not so many for the 450. Any help would be much appreciated! Rob
Straight JD 450 clutch oil manifold replacement.
-
- 40C crawler
- Posts: 14
- Joined: Thu Dec 08, 2016 12:30 pm
- Location: Hot Springs, SD
Re: Straight JD 450 clutch oil manifold replacement.
Hi Rayman,
It would appear that the HLR transmissions were used from the JD450 through the JD450c. Pretty certain the manifolds are identical between all three (JD450b included).
It would appear that the HLR transmissions were used from the JD450 through the JD450c. Pretty certain the manifolds are identical between all three (JD450b included).
Leverage, it's what's for dinner!
60 Cat D6B dozer
?? JD 350b crawler/loader
02 JD 260 Skid Steer
68 Case 580CK diesel w/backhoe
67 Case 580CK Gas w/backhoe
81 JLG S35 scissor lift
Clark C500-70, C500-30, GCX40 forklifts
81 Intl 1854 dump
60 Cat D6B dozer
?? JD 350b crawler/loader
02 JD 260 Skid Steer
68 Case 580CK diesel w/backhoe
67 Case 580CK Gas w/backhoe
81 JLG S35 scissor lift
Clark C500-70, C500-30, GCX40 forklifts
81 Intl 1854 dump
Who is online
Users browsing this forum: No registered users and 148 guests