350B reverse

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

350B reverse

Post by gregjo1948 » Sat Sep 16, 2017 4:55 am

My 350B moves forward as it should but, when going to reverse, it's slipping. Seems OK until there's a strain on it. (back blading or backing up hill) Is it in need of an adjustment or is the reverser failing? thanks, gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

timmtnman
440 crawler
440 crawler
Posts: 165
Joined: Sun May 15, 2016 3:44 pm
Location: Sylva NC

Re: 350B reverse

Post by timmtnman » Sat Sep 16, 2017 5:44 pm

My reverser gives me a problem also. In the down position it works fine but when you pull it up it hesitates a little then moves but makes a screeching noise while moving. Thought it would straighten out after using it for a while but never did. I just leave it down and shift the tranny most of the time. Read a post somewhere that if one side went out that you could use the other side but you have to shift gears all the time. It's a pain but it works for me.

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 60 guests