400g outside track width

Post support questions about your JD350 and newer crawler here
Post Reply
cantbeatadeere
440 crawler
440 crawler
Posts: 149
Joined: Tue Sep 02, 2014 4:30 pm
Location: new york..upstate..

400g outside track width

Post by cantbeatadeere » Thu Sep 21, 2017 6:00 pm

I have an 82 inch wide equipment trailer and was wondering if a 400G will fit between the fenders -- blade up of coarse. thanks --- standard tracks
1970- JD 2520, 1991- JD 400G long track, 2003- JD 4710, 2012- JD 1026R, 2014 Bobcat E42 long arm, 2016- 14ft dump trailer, 2017- 24ft 11,000lb hyd. tilt equipment trailer aaand 2018 ram 2500 Big Horn CUMMINS :D :D

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Re: 400g outside track width

Post by shinnery » Thu Sep 21, 2017 7:52 pm

Here is a spec sheet for a 400G http://www.murphyused.com/images/specs/102.pdf I think the width is 64 inches given the track gauge is 50 in. and grouser length is 14 In. but I have never measured one.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

Post Reply

Who is online

Users browsing this forum: No registered users and 57 guests