400g outside track width
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
400g outside track width
I have an 82 inch wide equipment trailer and was wondering if a 400G will fit between the fenders -- blade up of coarse. thanks --- standard tracks
1970- JD 2520, 1991- JD 400G long track, 2003- JD 4710, 2012- JD 1026R, 2014 Bobcat E42 long arm, 2016- 14ft dump trailer, 2017- 24ft 11,000lb hyd. tilt equipment trailer aaand 2018 ram 2500 Big Horn CUMMINS
Re: 400g outside track width
Here is a spec sheet for a 400G http://www.murphyused.com/images/specs/102.pdf I think the width is 64 inches given the track gauge is 50 in. and grouser length is 14 In. but I have never measured one.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
Who is online
Users browsing this forum: No registered users and 48 guests