450C Track Loader, Stupid Question

Post support questions about your JD350 and newer crawler here
Post Reply
40C crawler
40C crawler
Posts: 18
Joined: Tue Sep 26, 2017 4:42 pm

450C Track Loader, Stupid Question

Post by Claus » Thu Nov 09, 2017 12:01 pm

My machine is not at home right now, I was looking to replace all the knobs on top of the levers. What thread are the knobs? Thanks.

User avatar
1010 crawler
1010 crawler
Posts: 360
Joined: Thu Aug 11, 2016 7:29 am
Location: Piney Woods of east Texas

Re: 450C Track Loader, Stupid Question

Post by amos » Sat Nov 18, 2017 10:53 am

Coarse thread and if memory serves they are 3/8". You can always get a known thread nut (3/8 NC) and try it on the shaft.I have dealt with shafts with either the treads cut off or obliterated and had good luck using a high strength silicone adhesive. It will hold during use and knob can still be removed with firm twisting at a later date as needed. Don't use JB Weld as once it is on it ain't coming off again.
Pushin hard or diggin deep life is good.
What's ahead is what matters. What's behind is already done.
A fool of a man is he who doesn't ask questions...
God gave us 2 ears and 1 mouth for a reason...

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests