450C Track Loader, Stupid Question
450C Track Loader, Stupid Question
My machine is not at home right now, I was looking to replace all the knobs on top of the levers. What thread are the knobs? Thanks.
Re: 450C Track Loader, Stupid Question
Coarse thread and if memory serves they are 3/8". You can always get a known thread nut (3/8 NC) and try it on the shaft.I have dealt with shafts with either the treads cut off or obliterated and had good luck using a high strength silicone adhesive. It will hold during use and knob can still be removed with firm twisting at a later date as needed. Don't use JB Weld as once it is on it ain't coming off again.
Pushin hard or diggin deep life is good.
What's ahead is what matters. What's behind is already done.
A fool of a man is he who doesn't ask questions...
God gave us 2 ears and 1 mouth for a reason...
What's ahead is what matters. What's behind is already done.
A fool of a man is he who doesn't ask questions...
God gave us 2 ears and 1 mouth for a reason...
Who is online
Users browsing this forum: No registered users and 82 guests