550b transmission

Post support questions about your JD350 and newer crawler here
Post Reply
ctben
MC crawler
MC crawler
Posts: 1
Joined: Mon Mar 12, 2018 6:57 pm
Location: Danielson CT

550b transmission

Post by ctben » Fri Mar 16, 2018 6:37 pm

I just did a full rebuild on the transmission and control valves 2nd and 3rd work great in forward and reverse. First is slow to engage and slips under a load but when i test the pressure at the test port it reads 300 psi. The pressure is the same in all 3 gears and F/R. I am lost on what to do because everything test fine and the torque converter and steering clutches are not slipping. Any help would be greatly appreciated
Thanks Ben

Post Reply

Who is online

Users browsing this forum: No registered users and 62 guests