350 reverser

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

350 reverser

Post by gregjo1948 » Wed Mar 21, 2018 12:43 pm

As I stated in earlier posts, my 350 won't back up using the reverser after the machine reaches working temperature. It does seem to move OK with the reverser in the forward position. Will any damage be caused by running the machine with the reverser in forward position and the trans. in reverse gear? Thanks, gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 reverser

Post by Lavoy » Wed Mar 21, 2018 1:43 pm

Won't hurt a thing. If system pressure is down, forward clutch may start to slip too, just be careful.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Re: 350 reverser

Post by gregjo1948 » Thu Mar 22, 2018 3:32 am

Lavoy wrote:
Wed Mar 21, 2018 1:43 pm
Won't hurt a thing. If system pressure is down, forward clutch may start to slip too, just be careful.
Lavoy
Thanks for reply.

Lavoy,
This is the machine you got me parts for(for the reverser) last fall.
I just want to move it back into the shop for repair but, don't want to
make things worse by moving it in reverse that way. I couldn't see why it would hurt but,
what do I know. I'm the guy that must have messed something up when putting it together.
gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 reverser

Post by Lavoy » Thu Mar 22, 2018 11:44 am

Check all your pressures first, make sure the reverse pressure is up to spec. If not, that is your problem I would think..
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 66 guests