350 roller grease fitting

Post support questions about your JD350 and newer crawler here
Post Reply
Don2018
420 crawler
420 crawler
Posts: 44
Joined: Mon Apr 09, 2018 4:56 pm
Location: SW Wisconsin

350 roller grease fitting

Post by Don2018 » Sat Apr 21, 2018 8:01 am

A couple of my roller grease fittings squeeze the grease back out of the zerk. Are these bad zerks that need to be replaced or is there a larger internal roller problem? Where to get new zerks if that's the problem?

1966 diesel 350, 5 roller.
Thanks

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: 350 roller grease fitting

Post by Stan Disbrow » Sun Apr 22, 2018 4:40 am

Hi,

The zerk has a ball right at the opening with a spring behind it. When the spring gets weak, it leaks. The thing is built such you can't fix it. So, you just replace it.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

Don2018
420 crawler
420 crawler
Posts: 44
Joined: Mon Apr 09, 2018 4:56 pm
Location: SW Wisconsin

Re: 350 roller grease fitting

Post by Don2018 » Sun Apr 22, 2018 7:28 am

Ok I'll check out Napa
Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests