Looking at a 350B ...anything you see that says..RUN!!?

Post support questions about your JD350 and newer crawler here
User avatar
psprague
440 crawler
440 crawler
Posts: 146
Joined: Fri Apr 29, 2016 11:47 pm
Location: Olympic Peninsula

Re: Looking at a 350B ...anything you see that says..RUN!!?

Post by psprague » Tue Aug 07, 2018 8:17 am

If you have a herd of 350's then parts machines make good sense.

I saw a 1010 loader recently on CL for 2K, it looked like a bomb had gone off nearby. I have no idea what it actually went for though, I didn't let it follow me home.
JD 450c forestry, JD 440A cable skidder

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: Looking at a 350B ...anything you see that says..RUN!!?

Post by Stan Disbrow » Tue Aug 07, 2018 8:19 am

Hi,

I would say all those parts would need rebuilding along the way. But, that is worth a lot because you can do it before you need those parts. Maybe even rebuild all of the drive parts and use that sad u/c for testing....

As far as the blade goes, the PAT had optional extensions for it, so it wound up at least as wide as the outside blade. Just how much work is involved, that is unknown. I don't know of anyone who has done that.

Could PAT the outside mount blade. This, I know has been done:

viewtopic.php?f=6&t=11172

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

Post Reply

Who is online

Users browsing this forum: No registered users and 50 guests