The oil cooler is leaking between the cooler and the block. Is there a special gasket or is it just an O ring that seals it? In the parts manual it calls it packing. Just trying to get some info or some parts BEFORE I take it apart. Anyone got experience in this matter?
Thanks
Bennett
Oil cooler leak on 350B
Oil cooler leak on 350B
JD 350B w/ 4 in1
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
Re: Oil cooler leak on 350B
I believe you are referring to the engine oil cooler the engine oil filter mounts on. If so the parts manual calls the seal between it and the block a washer, part number R70956. It might be the same as the oil filter gasket but, I would get it, by the part number, from JD rather than risk an engine with the wrong material or a bad fit. You can use the on line parts manual at https://jdparts.deere.com/servlet/com.d ... anguage=19 to check it out.
Who is online
Users browsing this forum: No registered users and 79 guests