Can someone recommend a competent shop in central Washington State to turn the brake drums on for a 450(). Ellensburg, Yakima or Wenatchee would be closest. Also what would be a reasonable price?
John
Machine Shop in Central Washington State
-
- 440 crawler
- Posts: 139
- Joined: Thu Oct 19, 2017 5:23 pm
- Location: Cle Elum, Wa
Machine Shop in Central Washington State
Reporting from the Peoples Republic of Washington State.
Re: Machine Shop in Central Washington State
Any auto shop should be able to cut them on a brake lathe.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 440 crawler
- Posts: 139
- Joined: Thu Oct 19, 2017 5:23 pm
- Location: Cle Elum, Wa
Re: Machine Shop in Central Washington State
My "go to" auto machine shop was not interested. I will try somewhere else.
Thanks Lavoy. I am getting ready order the disks and bands. I will PM you later.
Thanks Lavoy. I am getting ready order the disks and bands. I will PM you later.
Reporting from the Peoples Republic of Washington State.
Re: Machine Shop in Central Washington State
That's odd, not hard to do on a brake lathe. Find an old time shop if you can, that might help.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 440 crawler
- Posts: 139
- Joined: Thu Oct 19, 2017 5:23 pm
- Location: Cle Elum, Wa
Re: Machine Shop in Central Washington State
Probably confused him. I will just let him see it. I am working remote and want to keep travel to a minimum.
Thanks again
John
Thanks again
John
Reporting from the Peoples Republic of Washington State.
Who is online
Users browsing this forum: No registered users and 63 guests