350 JD crawler loader bolts?
350 JD crawler loader bolts?
Replaced steering clutch on JD 350 crawler loader and have 4 bolts ( 5/8" ) that are unusual in that they have a raised shoulder that runs from the threads about half way to the bolt head and then reduces to the thread diameter ( no threads ) the rest of the way to the bolt head. I didn't notice that when I took things apart. It has mounting brackets for a quick-tach backhoe. Any ideas where they belong?
-
- 1010 crawler
- Posts: 258
- Joined: Wed Sep 11, 2013 3:34 pm
- Location: Shiner, texas
Re: 350 JD crawler loader bolts?
On a dozer they would be in the front (bottom) holes on the final drive. Don't know about loader but suspect the same.
Early 40C w/Yakima toolbar and homebuilt ripper: 350 w/6-way
Re: 350 JD crawler loader bolts?
Thanks. with that info I went back to my manual and see they are described as "special" cap screws and are indeed the bolts attaching the final drive to the rear axle housing. Thanks again for the help solving that mystery...
Re: 350 JD crawler loader bolts?
On the humorous side...What do they call an Armadillo? A Possum in a half shell...Sorry, I couldn't help myself!
Who is online
Users browsing this forum: No registered users and 59 guests