450C Coming Home.

Post support questions about your JD350 and newer crawler here
Post Reply
Claus
420 crawler
420 crawler
Posts: 25
Joined: Tue Sep 26, 2017 4:42 pm

450C Coming Home.

Post by Claus » Sun Oct 20, 2019 3:41 pm

I'm pretty stoked my 450C is coming home tomorrow. I bought it 2 years ago and it broke very shortly after. The castle nut on the end of the pinion shaft had broken and a bearing was out in the front gearbox, hard to say which happened first but it was a mess. My Uncle donated His time and shop, can't thank hime enough. Replaced the clutch, rear main seal, throw out bearing, pilot bearing, reverser pump, a few gears, ring and pinion. many, many other bearing, races, seals, etc. Put on K&M seat cushion, Auto Meter Gauges, new stack and Centri precleaner, alternator and battery and lots of small stuff. New injectors and pump rebuild planned for next year, little hard starting right now.

Image
Image
Image
Image

User avatar
DrLoch
1010 crawler
1010 crawler
Posts: 382
Joined: Thu Jul 04, 2013 6:39 am
Location: Mebane NC

Re: 450C Coming Home.

Post by DrLoch » Mon Oct 21, 2019 6:52 am

Nice machine. I have one just like it although not near as pretty. It needs some work now as well.
450C Track Loader
291457T

User avatar
77 Ford
1010 crawler
1010 crawler
Posts: 477
Joined: Tue Nov 22, 2011 7:52 pm
Location: Missouri

Re: 450C Coming Home.

Post by 77 Ford » Mon Oct 21, 2019 7:27 am

Nice looking machine.

On the trans temperature gauge did you go with mechanical or electrical sender? If electrical what sending unit did you use?
JD- 450C track loader
Serial #208336T

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 44 guests