Post support questions about your JD350 and newer crawler here
-
sthreet
- MC crawler
- Posts: 2
- Joined: Sat Nov 02, 2019 2:16 pm
Post
by sthreet » Sat Nov 16, 2019 2:51 pm
just changed final drive on 550B. put everything back together now will not pull on that side. Where did i go wrong.
-
Jim B
- 350 crawler
- Posts: 2086
- Joined: Sun Nov 05, 2017 11:36 am
- Location: western Maine
Post
by Jim B » Sun Nov 17, 2019 5:47 am
Did you pull just the final drive itself, or did you go deeper and do anything to the steering clutch? Do you have the technical manual TM1331 for your machine?
-
sthreet
- MC crawler
- Posts: 2
- Joined: Sat Nov 02, 2019 2:16 pm
Post
by sthreet » Mon Nov 18, 2019 9:16 am
all we did was replace final drive. i have the manuel
-
Jim B
- 350 crawler
- Posts: 2086
- Joined: Sun Nov 05, 2017 11:36 am
- Location: western Maine
Post
by Jim B » Tue Nov 19, 2019 7:51 am
Why did you replace the final drive? Was it working prior to you replacing the final drive? If the final you installed was complete and in working condition and it "pulled" on that side prior to the final drive change; it would seem you must have upset something in the steering clutch during the change.
Who is online
Users browsing this forum: No registered users and 41 guests