Is loud gear whine normal in reverse for a 450B?
I bought this machine in pieces, I rebuilt everything but, this is
The first 450 I have ran so I am not sure what to expect.
Noise in reverse
Re: Noise in reverse
I have a 450c mine is very noisy in reverse also not sure were to look but have using possible gear clearance
JIM
JIM
Re: Noise in reverse
My 350B is also noisy when in reverse...high pitch whine.
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
Re: Noise in reverse
My 350C was very loud when the reverser was in reverse....I removed the reverser and the bearing shimming was off a country mile .0014 when it should be .003 --- so around 10 thousands to loose. I put everything in spec and I must say it was WELL worth the effort.....MINT!!!
1970- JD 2520, 1991- JD 400G long track, 2003- JD 4710, 2012- JD 1026R, 2014 Bobcat E42 long arm, 2016- 14ft dump trailer, 2017- 24ft 11,000lb hyd. tilt equipment trailer aaand 2018 ram 2500 Big Horn CUMMINS
Re: Noise in reverse
Oops! Think you meant 0.014" of play. 0.0014 would be 0.0016 too tight. Stay safe
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Re: Noise in reverse
Thanks Jim B--- I did the math twice and thought he was backwards on the numbers.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 153 guests