Hi guys
I'm new to the sight.
I have a couple JD 350's a dozer and a loader
And I need a few parts for the old things where can I find a good source for some used parts?
Toby
New to JD Crawler
-
- 440 crawler
- Posts: 166
- Joined: Sun Sep 22, 2019 8:56 am
- Location: Quesnel, BC, Canada
Re: New to JD Crawler
Contact Lavoy on this site, he has a JD store and repair shop.
Maybe post on section “late model JD “ for your needs and help, on this site.
Maybe post on section “late model JD “ for your needs and help, on this site.
-
- 440 crawler
- Posts: 166
- Joined: Sun Sep 22, 2019 8:56 am
- Location: Quesnel, BC, Canada
Re: New to JD Crawler
And welcome!
Re: New to JD Crawler
Welcome to the site.
Lavoy Wilcox, the gentleman that provides this site is in the business of repair and selling parts for JD crawlers. His contact info is the second post down on the "Lavoy's Little Shop O' Deeres" Board. He works on JDs, knows the which parts are good and which ones to stay away from, and he has hands on knowledge to help if you have a problem. If he can't help you, he likely will have suggestions of who can. Lavoy also sells manuals if you don't have them for your machines.
You might want to add your general location to your profile. Knowing about where your at will sometimes get info for you that might be bypassed other wise. And there might be a member close by if you need a hand sometime.
HTH,
Jim
Lavoy may move this to the Late Model Board when he sees it.
Lavoy Wilcox, the gentleman that provides this site is in the business of repair and selling parts for JD crawlers. His contact info is the second post down on the "Lavoy's Little Shop O' Deeres" Board. He works on JDs, knows the which parts are good and which ones to stay away from, and he has hands on knowledge to help if you have a problem. If he can't help you, he likely will have suggestions of who can. Lavoy also sells manuals if you don't have them for your machines.
You might want to add your general location to your profile. Knowing about where your at will sometimes get info for you that might be bypassed other wise. And there might be a member close by if you need a hand sometime.
HTH,
Jim
Lavoy may move this to the Late Model Board when he sees it.
Re: New to JD Crawler
Thanks
I'm trying to learn how this sight works and how to post pictures also this sight is confusing to me on how it works but get it figured out and time goes on .
It's just tough for us old farmers to learn the new technology
Toby
I'm trying to learn how this sight works and how to post pictures also this sight is confusing to me on how it works but get it figured out and time goes on .
It's just tough for us old farmers to learn the new technology
Toby
Who is online
Users browsing this forum: No registered users and 72 guests