350 winch
350 winch
Did the early 350s use any winch other then the 3315. I picked up 2 basket case ones today thinking they were 10s and would try to get one on my 440 but they wont be close. The mounts measure and look like it will line right up on my 350 B. Why do i get into these projects? lol
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Re: 350 winch
The 3310 was the manual winch on 350s. Both the 3310 and 3315 show up in the online 350 parts catalog.
Re: 350 winch
Thanks i just figured that out myself. No tags on it but figured it out through the control unit. Does anyone have any thoughts on rebuilding it, like are they worth it or non stop money pits???? thanks.. going to try to dig up info for it now. If all else fails it would make a good rear bumper. ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Re: 350 winch
Got 350 B and C manuals and both have the 3315 in it and not the 3310 anyone know where that is?
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Re: 350 winch
?maybe 350 straight.
Yep, found in the Deere parts for 350 straight loader.
https://partscatalog.deere.com/jdrc/nav ... VJUE1FTlRd
Best regards, Bruce
Yep, found in the Deere parts for 350 straight loader.
https://partscatalog.deere.com/jdrc/nav ... VJUE1FTlRd
Best regards, Bruce
Re: 350 winch
geeshhhh hate to add another manual for a 10 page section.. the pile of manuals is getting tall... ![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Re: 350 winch
Thank you that parts link is great !!!!!!
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Re: 350 winch
OK I confirmed both are 3310 winches. The local dealer said just use them for boat anchors since there isnt any parts for them. Does anyone agree with that or know where i might get some.. I am sure i would need seals of course and prob some bearings the worst would be the brake band ( although i think i got that covered) and clutches?? Any thoughts? Lavoy??? Would you have any access to them??? Thanks !!!!! Looking at them i am pretty set on the hard to get parts. I have 2 controllers and one acumulator so thats a help. I dont really want to give up on them.
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Re: 350 winch
I would not let that old iron go down. You have all the “hard-to-find stuff”. The seals, bearings are common to other equipment. Gaskets can be cut. You have the brake covered. Clutch disc are available. Definitely, go for it. It won’t be the cheapest part of your crawler, but it will be nice.
Re: 350 winch
Thank you I needed that...lol I know its going to be a project and $$$$ but i just cant stand to see something that can me fixed thrown out. And i am NOT buying another boat because i have a anchor ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Who is online
Users browsing this forum: No registered users and 85 guests