Post support questions about your JD350 and newer crawler here
-
robsdeere
- MC crawler
- Posts: 1
- Joined: Sat Dec 23, 2006 5:33 pm
- Location: PA
Post
by robsdeere » Sat Dec 23, 2006 10:30 pm
Hello ,Newbe here. I have worked on alot of deere crawlers but have a 350 with no service manual, help. I am replacing several trans. gears, mainly the reverse gear which is located on the pinion shaft. Does anybody know of a way to replace this without removing one the final drives and loosening the diff. carrier bearing.
Thanks
-
Lavoy
- Site Admin
- Posts: 10943
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sun Dec 24, 2006 7:15 pm
If you are working on any of the trans shafts, really no way to do much of anything without both finals off, and the ring gear and carrier out of the way.
Check on E-bay, there are usually some manuals on there, or they are current from Deere, at least in CD format.
Lavoy
Who is online
Users browsing this forum: No registered users and 31 guests