I would like to replace the worn bucket pins on the 350c I just bought but Deere wants a fortune for them. The Deere part numbers are T32780 and AU14215. Anyone know of a source? I didn't see them listed on Lavoy's parts page.
This crawler has a much more serious problem in the transmission but still deciding on how I want to attack it.
Source for 350 bucket pins
-
- 430 crawler
- Posts: 58
- Joined: Fri Jan 16, 2009 11:00 pm
- Location: Warrenton, MO
Source for 350 bucket pins
1010D D 6-way hydro blade w/ 3point, 1010D C/L, 350c C/L, JD B, JD 50, JD 520, JD 720LP, JD 4020, JD 4230
Re: Source for 350 bucket pins
Hopefully Lavoy has a source. This may be a case of buy from Deere or find a shop that can make them. How are the bushings and bores they go through?
Re: Source for 350 bucket pins
Deere only as far as I know.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 430 crawler
- Posts: 58
- Joined: Fri Jan 16, 2009 11:00 pm
- Location: Warrenton, MO
Re: Source for 350 bucket pins
Jim B,
Good point, I made and assumption the pins are worn and didn't consider the bushings. I will pull one of the lower pins and check for wear.
Good point, I made and assumption the pins are worn and didn't consider the bushings. I will pull one of the lower pins and check for wear.
1010D D 6-way hydro blade w/ 3point, 1010D C/L, 350c C/L, JD B, JD 50, JD 520, JD 720LP, JD 4020, JD 4230
Who is online
Users browsing this forum: No registered users and 58 guests