Bucket pins 450C
Bucket pins 450C
Looking for bucket pins and bushings - dimensions.Does anybody know the size of the pins and bushings needed ? . Standard 1 1/4 yard bucket . Or a source for aftermarket pins JD wants 285$ a pin for the bottoms and 145$ a bushing . That’s way too much for a pin . Thanks guys .
Re: Bucket pins 450C
I can't help you with the sizes, maybe someone will be along to help you with that.
Some thoughts. First are you only looking for Canadian sources? I know the shipping and other factors from the states can be an issue. Have you called and talked to Lavoy to see if he can help you in any manner? Have you searched eBay using the part numbers you need? I checked a pin and a bushing and several sources appear. One of them might ship to Canada. Again just some thoughts that might help. Good luck.
Jim
Some thoughts. First are you only looking for Canadian sources? I know the shipping and other factors from the states can be an issue. Have you called and talked to Lavoy to see if he can help you in any manner? Have you searched eBay using the part numbers you need? I checked a pin and a bushing and several sources appear. One of them might ship to Canada. Again just some thoughts that might help. Good luck.
Jim
Re: Bucket pins 450C
Yes been looking for a Canadian site the few I found offer pins and bushings with just sizes next to them . I’m going to have to measure what I have than source them , haven’t talked to Lavoy yet . I need to do bucket and links and top loader pins , Just don’t want to put 5k into some steel pins.
Who is online
Users browsing this forum: No registered users and 86 guests