450C rollers

[Wilbur]

Will rollers off any other crawlers fit our new to us 450? Anyone in western Pa. have a couple laying around?

[Jim B]

Here is a page from the JD parts catalog to give you an idea. https://partscatalog.deere.com/jdrc/sid ... pgId/66461

Do you have a 450 or a 450C? Do you know how to tell by serial number? It won't matter with the rolls, but will with some parts you might need in the future.

[Lavoy]

450 would be it as far as I know.
Lavoy

[Wilbur]

Thanks for the replies. I hate searching for parts. I hate buying parts.

[jsal]

have two used lower and one new berco support roller in Armada MI

JIM

[Jim B]

Have you checked with Wengers in Myerstown, PA?

[Wilbur]

jsal, Thanks but no thanks. I've found a couple used ones near by that I'm checking on today.

JIM B, no I haven't. I have heard of them but they never entered my mind. I'll check them out today.

[jsal]

Good !!

[Wilbur]

Struck out at Wengers JIM B.
I picked up four that are in much better shape than ours off Ebay. At least I got to check them out before I bought them. I have plenty of boat anchors already!

[nelstomlinson]

Thanks for the replies. I hate searching for parts. I hate buying parts.

Searching for parts makes my head hurt. Buying parts is worse, because it makes my head and my wallet hurt. Installing the parts makes my back hurt.

[Charlie]

Thanks for the replies. I hate searching for parts. I hate buying parts.

Buying is easy, I like buying the parts, it's the paying that I hate.

[Stan Disbrow]

Hi,

I have this nifty JD card. They keep the number in the computer at the parts counter. Practically free parts! I just put a regular payment every month until the balance zeros out. Which it actually does once in a blue moon.

Stan

[Wilbur]

I finally had to give in and buy six new ones. OUCH!