Straight 350 track frame

Post support questions about your JD350 and newer crawler here
Post Reply
Blane
40C crawler
40C crawler
Posts: 10
Joined: Wed Jan 15, 2020 5:13 pm
Location: Norwich N.Y. 13815

Straight 350 track frame

Post by Blane » Thu Nov 26, 2020 12:51 pm

What are your thoughts on cutting the back of the track frame off to remove and replace the final drive?
Top
Jim B
350 crawler
350 crawler
Posts: 2086
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Straight 350 track frame

Post by Jim B » Thu Nov 26, 2020 5:17 pm

Use this link and read the info in that post and the links in it as well. viewtopic.php?t=9530
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: Straight 350 track frame

Post by Lavoy » Thu Nov 26, 2020 6:16 pm

Lazy mans way, absolutely no need to cut the track frame.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
CatD8RII
1010 crawler
1010 crawler
Posts: 324
Joined: Mon Jan 16, 2006 9:26 am
Location: PA

Re: Straight 350 track frame

Post by CatD8RII » Thu Nov 26, 2020 7:35 pm

Where do you plan to put your sprocket shield and rock guard if the track frame is cut?
Top
Blane
40C crawler
40C crawler
Posts: 10
Joined: Wed Jan 15, 2020 5:13 pm
Location: Norwich N.Y. 13815

Re: Straight 350 track frame

Post by Blane » Thu Nov 26, 2020 7:46 pm

Used a similar method to remove it but this technique appears to be more graceful. Thank you everyone
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 33 guests