Ok, hoping some confusion can be cleared up for me. I have a service manual for a JD350 C/D* model (TM1115). The cover says 350C, 350D Bulldozer...
The confusion comes on page I-II-3, actually the whole specifications section. The dimensions for the dozer show options for models 6305 and 6310... why in the world does it not say 350C or 350D?
So is a 6305/6310 the same dimensions as 350C?
*Note: "C" and "D" refer to the actual series model...not C for crawler
I'm trying to verify the width of the dozer, it's two hours away, to verify it will fit in a dump truck to get it home the manual only added confusion.
Thanks
JD350 service manual question (dumb) 6305/6310?
JD350 service manual question (dumb) 6305/6310?
1978 350CE Dozer, 6-way blade
Re: JD350 service manual question (dumb) 6305/6310?
The 6305 is an adjustable inside mount dozer. And 6310 is a 4 way outside mount dozer.
Re: JD350 service manual question (dumb) 6305/6310?
Thanks for the info B Town
I am looking to buy a 1978 JD350CE with 6 way blade, so that would be a 6305 then and should have an 80" wide blade.
Thanks again!
Tom
I am looking to buy a 1978 JD350CE with 6 way blade, so that would be a 6305 then and should have an 80" wide blade.
Thanks again!
Tom
1978 350CE Dozer, 6-way blade
Who is online
Users browsing this forum: No registered users and 38 guests