JD350 Injectors

Post support questions about your JD350 and newer crawler here
Post Reply
stevenx40
40C crawler
40C crawler
Posts: 13
Joined: Tue Oct 04, 2011 4:29 am
Location: Lower Catskills, New York

JD350 Injectors

Post by stevenx40 » Sun Feb 21, 2021 8:21 am

Hello again, Well after searching for new replacement 9.5mm pencil injectors for my 1969 , all that i find have a fixed threaded fitting attached to the injector side. My originals have a swivel fitting on the injector side and the fuel line side is fixed in place. The part number on the original injector is 17579J5. So are my choices , maybe find original style so as not to play with fuel lines, try to adapt new ends on fuel lines to match up with newer style injectors, possibly have old ones refurbished ( don't like that option ) . I also noticed that originals were calibrated to 3000 psi after market are set to 3200 psi not sure how much of an effect this would cause on performance and accelerated wear on injection pump. Any thoughts ! Steve

User avatar
LeonardL
350 crawler
350 crawler
Posts: 869
Joined: Thu Oct 06, 2011 7:11 pm
Location: Missouri

Re: JD350 Injectors

Post by LeonardL » Sun Feb 21, 2021 9:30 am

Check with Lavoy on this. I think he will be able to fix you up. Otherwise any good Deere dealer should be able to find what you need.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.

stevenx40
40C crawler
40C crawler
Posts: 13
Joined: Tue Oct 04, 2011 4:29 am
Location: Lower Catskills, New York

Re: JD350 Injectors

Post by stevenx40 » Mon Feb 22, 2021 7:17 am

I found the Error in my thinking, the nuts were just rusted solid after 52 years, all is well. Steve

User avatar
LeonardL
350 crawler
350 crawler
Posts: 869
Joined: Thu Oct 06, 2011 7:11 pm
Location: Missouri

Re: JD350 Injectors

Post by LeonardL » Mon Feb 22, 2021 6:29 pm

Glad you figured it out. :D
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.

Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests