350B loader Arm bushings, pins and lever arms rebuild

cjman1977 · Post by **cjman1977** » Mon Apr 19, 2021 5:51 am

Is there a source for new or aftermarket parts to rebuild the pivot points, pins and lever arms for a 350B loader arms? Dealership parts still available?

Bennett

LeonardL · Post by **LeonardL** » Tue Apr 20, 2021 8:54 am

The last time I got parts for a loader as in boom and bucket parts was about five years ago and they were from Deere. I would check with a Deere industrial dealer to see what's available. They may still have some of the parts available.

cjman1977 · Post by **cjman1977** » Tue Apr 20, 2021 10:31 am

I just checked with Deere, and the only parts available now are the bushings and washers. most have been obsoleted. Looks like I will have to fabricate these parts.

Thanks for the Info!
I love this site and all the kind people that are on it.

Bennett

boaterri · Post by **boaterri** » Wed Apr 21, 2021 5:24 pm

What would be a good grade of steel to use for fabricating pins?

Post by **Lavoy** » Wed Apr 21, 2021 11:09 pm

Any good steel with enough carbon in it to heat treat.
Lavoy

JDcrawlers Messageboard

350B loader Arm bushings, pins and lever arms rebuild

350B loader Arm bushings, pins and lever arms rebuild

Re: 350B loader Arm bushings, pins and lever arms rebuild

Re: 350B loader Arm bushings, pins and lever arms rebuild

Re: 350B loader Arm bushings, pins and lever arms rebuild

Re: 350B loader Arm bushings, pins and lever arms rebuild

Who is online