Is there a source for new or aftermarket parts to rebuild the pivot points, pins and lever arms for a 350B loader arms? Dealership parts still available?
Bennett
350B loader Arm bushings, pins and lever arms rebuild
350B loader Arm bushings, pins and lever arms rebuild
JD 350B w/ 4 in1
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
Re: 350B loader Arm bushings, pins and lever arms rebuild
The last time I got parts for a loader as in boom and bucket parts was about five years ago and they were from Deere. I would check with a Deere industrial dealer to see what's available. They may still have some of the parts available.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.
Re: 350B loader Arm bushings, pins and lever arms rebuild
I just checked with Deere, and the only parts available now are the bushings and washers. most have been obsoleted. Looks like I will have to fabricate these parts.
Thanks for the Info!
I love this site and all the kind people that are on it.
Bennett
Thanks for the Info!
I love this site and all the kind people that are on it.
Bennett
JD 350B w/ 4 in1
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
Re: 350B loader Arm bushings, pins and lever arms rebuild
What would be a good grade of steel to use for fabricating pins?
Re: 350B loader Arm bushings, pins and lever arms rebuild
Any good steel with enough carbon in it to heat treat.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 153 guests