Hello All,
I want to clean the HLR transmission filter and check condition.
I have read several posts on this and did not see how to remove the cover.
I have drained the oil, removed the 3 bolts that seem to hold the filter cover on.
I do not really see what to pry on to get it to come loose, I am trying not to break anything. I have tapped on the cover, and tried to pry but no luck.
Any suggestions?
Larry
JD450 H-L-R transmission filters
-
- 420 crawler
- Posts: 28
- Joined: Sun Sep 09, 2018 6:00 am
- Location: Fitchburg, Massachusetts
Re: JD450 H-L-R transmission filters
Hi Larry,
Try working a small thin chisel between the cover and the case and it will come off. It is probably stuck on due to the gasket and sealant being old.
Mike
Try working a small thin chisel between the cover and the case and it will come off. It is probably stuck on due to the gasket and sealant being old.
Mike
Re: JD450 H-L-R transmission filters
Thank you,
that was what I thought but thought I should ask before doing something stupid.
that was what I thought but thought I should ask before doing something stupid.
Who is online
Users browsing this forum: No registered users and 74 guests