Looking for JD 350 steering clutch housing

Post support questions about your JD350 and newer crawler here
Post Reply
mc_mike
430 crawler
430 crawler
Posts: 98
Joined: Mon Nov 28, 2005 11:00 am
Location: Green Springs, Ohio

Looking for JD 350 steering clutch housing

Post by mc_mike » Sun Dec 26, 2021 3:05 pm

Anyone know where I can get a right side steering clutch housing for a straight 350 Mine is severely cracked.

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Looking for JD 350 steering clutch housing

Post by Jim B » Wed Dec 29, 2021 2:09 pm

Have you checked with Lavoy? Have you called any salvage yards? You may want to have your crawler serial number and the casting number that is on your housing in hand. The parts catalog shows a serial number break with two different ones used. I don't remember of hand the difference and am not sure they will interchange. It may have to do with some having different holes for attachments.

Here is a link to the online parts catalog. https://partscatalog.deere.com/jdrc/nav ... ment/62257

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Looking for JD 350 steering clutch housing

Post by Lavoy » Thu Dec 30, 2021 8:24 am

I do not have one, I will check with a buddy to see if he has one.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Garymcd
MC crawler
MC crawler
Posts: 8
Joined: Thu Dec 02, 2021 5:58 am
Location: Arp, TX

Re: Looking for JD 350 steering clutch housing

Post by Garymcd » Fri Dec 31, 2021 5:09 am

Will one off a 450 fit it?

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Looking for JD 350 steering clutch housing

Post by Jim B » Fri Dec 31, 2021 5:56 am

No, a 450 housing will not fit a 350.

Garymcd
MC crawler
MC crawler
Posts: 8
Joined: Thu Dec 02, 2021 5:58 am
Location: Arp, TX

Re: Looking for JD 350 steering clutch housing

Post by Garymcd » Fri Dec 31, 2021 6:26 am

Ok. I have a 450 parts dozer and was going to hook you up but dang the luck.

User avatar
NWJD fan
440 crawler
440 crawler
Posts: 154
Joined: Wed Apr 13, 2011 10:19 pm
Location: Dease Lake B.C.

Re: Looking for JD 350 steering clutch housing

Post by NWJD fan » Fri Jan 07, 2022 1:56 pm

Try Mark in Johnson Vermont. He used to post here as pondhogvt and regularly has listings in Vermont craigslist in heavy duty equipment for 350 and 450 parts. He had 350C steering clutch housings a couple of years back.

Post Reply

Who is online

Users browsing this forum: No registered users and 58 guests